S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Install the holder - B - for the heat exchanger - C -.
-
Remove the screw - G - from the new clamp - E -.
-
Position the new clamp - E - on the coolant pipe so it can be secured as shown in the illustration.
-
Lightly coat the sealing ring - F - with coolant and place on coolant pipe - D -.
-
Insert the coolant pipe - D - in the heat exchanger.
-
Press the coolant pipe - D - into the heat exchanger and position the clamp - E - on the connecting point to the heat exchanger as shown in the
illustration.
‹› The clamp - E - engages when it is pressed in.
-
Insert the screw - G - in the clamp and tighten it to secure the clamp.
-
Install the holder - A - for the coolant pipe - D -.
-
Install coolant pipe - E - in the heat exchanger as was described for the coolant pipe on the right side.