S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Insert the Right Vent Temperature Sensor (G151) - B - on the proper side into A/C unit mount - D -.
-
Check the Right Vent Temperature Sensor (G151) for correct seating in mount - D -.
‹› The Right Vent Temperature Sensor (G151) - B - can only be inserted into mount - D - in one position, rotate 180° if necessary).
‹› An O-ring seal - C - can be installed so that the Right Vent Temperature Sensor (G151) fits without play in mount - D -.
-
Install the removed components again in reverse order.
-
Check the DTC memory for the Climatronic Control Module (J255) A/C control head and erase any faults displayed if necessary.