audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Evaporator Temperature Sensor / Switch > < Evaporator Drain Tube|Service and Repair|Page 13784
Page 3
background image

-

The gap between the lower floor panel - F - and the insulation mat - G - installed in the center tunnel: there must be enough space for condensation
to exit from the condensation drain -  D -.

-

Check the condensation water drain of the A/C unit - E - for contamination (e.g. using a piece of wire) and clean it if necessary.

-

Insert condensation water drain into opening in lower floor plate -  C -.

-

Install the condensation water drain hose - A - at the condensation water drain of the A/C unit - E - and secure with the clamp - B -.

-

Check the installation position of the floor mat, it must not constrict (compress) the cross section of the condensation water drain hose -  A -.

-

Install the left and/or right covers of the center console. Ensure they are not touching the condensation water drain hose - A - and are not
compressing its cross section.

Evaporator Temperature Sensor / Switch > < Evaporator Drain Tube|Service and Repair|Page 13784