S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Remove grommets - E - and - F - from the coolant pipes.
-
Remove grommet - H - from the connecting flange of the refrigerant lines - D -.
-
Remove the grommet - G - of the air duct to the A/C unit.
Removing
-
Perform the work to prepare the A/C unit for removal.
‹› On removal, note down bolt lengths and assignment for installation.
‹› All cable ties and other wiring harness fasteners released or cut open on removing air conditioner unit are to be reattached in same position on
installation.
-
Remove air ducts to vents in the center console => [ Air Routing and Distribution in Passenger Compartment ] See: Description and Operation/Air
Distribution in A/C and Air Intake Units, Block Diagram.
-
Remove bolts - C -.
-
Remove the air duct to the right footwell vent - B - (front passenger side).
-
Remove bolts - C -.