S6 Quattro Sedan V10-5.2L (BXA) (2007)
Headlamp Bulb: Removal and Replacement
Daytime Running Lamp, Removing and Installing
Daytime Running Lamp (Audi S6), Removing And Installing
Removing
-
Release clip using a screwdriver - arrow A - and remove air inlet grille - 1 - at lower part of bumper cover - arrows B -.
-
Remove front bumper cover.
-
Remove bolts - 1 - and - 2 -.
-
Release clip - 3 - and remove daytime running lamp - 4 - toward front out of bumper cover - arrow -.
Installing
Installation is performed in reverse order of removal, noting the following:
NOTE: If LEDs are malfunctioning, daytime running lamp must be completely replaced.
-
Install front bumper cover.
Tightening torque
Daytime running lamp to bumper: 2 Nm