S6 Quattro Sedan V10-5.2L (BXA) (2007)
Combination Switch: Service and Repair
Steering Column Switch Module
Steering Column Switch Module
Special tools, testers and auxiliary items required
‹› T8 Screwdriver (T40056 A)
Removing
-
Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.
-
Remove airbag unit. Refer to Removal and Installation.
-
Remove steering wheel.
-
On vehicles with electrically adjustable steering column, remove lower instrument panel cover on driver's side..
-
Remove bolts - 3 - and - 4 - using T8 Screwdriver (T40056 A).
-
If present, open mechanical steering column adjustment with handle - 5 -.
-
Remove Torx bolts - 6 -.
-
Disconnect upper trim - 2 - for steering column switch from lower trim - 1 - and remove both sections.
-
If installed, disconnect electrical harness connector at lower trim.
-
Remove bolt - 2 -.