S6 Quattro Sedan V10-5.2L (BXA) (2007)
Glove Box Lamp Switch: Service and Repair
Glove Compartment Lamp Switch E26, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical components.
-
Switch ignition off and remove ignition key.
-
Remove glove compartment.
-
Disconnect electrical harness connector - 3 -.
-
Remove joint pin 1 - 1 -.
-
Release switch - 2 - counter-clockwise - arrow - and remove.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Install glove compartment.