S6 Quattro Sedan V10-5.2L (BXA) (2007)
Alignment: Procedures
For Vehicles With Air Springs, Lift Wheel Suspension In Curb Weight Position
For vehicles with air springs, lift wheel suspension in control position
Special tools, testers and auxiliary items required
^
Engine/transmission jack V.A.G. 1383 A
^
Torque wrench V.A.G. 1783
^
Wheel hub support T10149
Special tools, testers and auxiliary items required
^
Insertion tool 10 mm VAG 1783/1
Bonded rubber bushings can only be turned to a limited extent.
Parts with bonded rubber bushings must therefore be brought into a position that corresponds to the position in driving mode before being tightened
(control position).
Otherwise, rubber bushing will be stressed, resulting in a shortened service life.