S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Cover 2nd connector terminal of adapter cable (V.A.G 1348/3-3) with insulating tape to prevent short circuit - arrow -.
-
Route Remote Control (V.A.G 1348/3A) switch forward in engine compartment.
-
Release the retaining clip and open the cover - A - over the positive terminal clamp.
-
Connect alligator clip to the positive terminal clamp.
-
Connect contact - 5 - to vehicle Ground (GND) using a jumper cable from the connector test set (V.A.G 1594C).
-
Remove fuel filler cap from fuel filler tube.
-
Remove rear engine cover - 2 - - arrows -.