S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-4101002.png)
-
Remove E-Box cover in left plenum chamber.
-
Release locking mechanisms - arrows - and pull fuse panel - 1 - and secondary relay carrier - 2 - upward in E box left plenum chamber.
-
Pull out relay and control modules, then unclip respective socket for electrical multi-pin harness connectors.
-
Remove fuses on fuse panel.
-
Pull off retaining strip - 1 - for harness connectors - arrow - and remove harness connectors from connector socket.
