S6 Quattro Sedan V10-5.2L (BXA) (2007)
Information Bus: Removal and Replacement
Left CAN-Bus Connector T46a, Removing and Installing
Left CAN-Bus connector T46a, removing and installing
Removing
-
Switch ignition off and remove ignition key.
-
Pry off left cover from instrument panel using a screwdriver - arrow -.
-
Press catches - 1 - on multi-pin connector.
-
Release securing bracket - arrow - and disconnect connector.
NOTE: For exact assignment of left CAN connector, refer to current wiring diagram.
Installing
Installation is performed in the reverse order of removal.