S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-2533006.png)
-
Disconnect the black Heated Oxygen Sensor (HO2S) 2 (G108) electrical harness connector- 5 -.
Checking primary voltage
-
Using a multimeter, check the Heated Oxygen Sensor (HO2S) 2 (G108) electrical harness connector terminals 2 to 6 for voltage.
Specified value: 0.400 to 0.500 Volts
-
Switch the ignition off.
If the specified value was not obtained:
