S6 Quattro Sedan V10-5.2L (BXA) (2007)
Air Injection Pump: Service and Repair
Secondary Air Injection Pump
Removing
‹› All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
Open the quick-release fasteners - 1 - and remove the front noise insulation.
-
Separate the electrical connector - 1 -.
-
Remove air guide hoses - 4 - and - 5 - from secondary air injection pump by pressing release buttons.
-
Remove nut or bolts - 2, 3, 6 - and remove secondary air injection pump.
Installing
Installation is in reverse order of removal, note the following: