S6 Quattro Sedan V10-5.2L (BXA) (2007)
Canister Purge Control Valve: Testing and Inspection
EVAP Canister Purge Regulator Valve, Checking
Special tools, testers and auxiliary items required
‹› Multimeter.
‹› Wiring diagram.
Test requirements
‹› Fuse (SA5) OK.
‹› The ignition switched off.
‹› Voltage for the Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) is supplied by the Engine Component Power Supply Relay
(J757).
Procedure
-
Remove the rear engine cover - arrows -.
-
Disconnect the Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) electrical harness connector - 1 -.