S6 Quattro Sedan V10-5.2L (BXA) (2007)
Specified value: battery voltage.
-
Switch the ignition off.
If the specified value was not obtained:
-
Check the Ignition Coil electrical harness connector terminal 1 to the Motronic Engine Control Module (ECM) Power Supply Relay (J271) socket
2/87 for resistance.
Specified value: 1.5 ohms Max.
If the specified value was not obtained:
-
Check the wiring connection for an open circuit, short circuit to Battery (+) or Ground (GND).
-
Check the wiring connection for damage, corrosion, lose or broken terminals.
-
If necessary, repair the faulty wiring connection.
If the specified values were obtained:
Checking activation
CAUTION!
Do not touch the Ignition Coils with Power Output Stage connecting parts or adapter cables during the following test.
-
Disable the power supply to the Fuel Injectors.
-
Using a diode test lamp, check the Ignition Coil electrical harness connector terminals 2 to 3 for voltage.