S6 Quattro Sedan V10-5.2L (BXA) (2007)
Throttle Position Sensor: Service and Repair
Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing and Installing
Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing And Installing
Removing
-
Remove drivers side lower instrument panel cover.
-
Disconnect electrical connector - 2 -.
-
Remove bolts -1 - and - 3 -.
-
Remove accelerator pedal module.
Installing
-
Tightening torque.
Installation is in reverse order of removal, note the following:
-
Install drivers side lower instrument panel cover.
Vehicles with automatic transmission:
If the throttle position sensor or engine control module are replaced in vehicles with automatic transmission, the kick-down function must be adapted.