S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-2381006.png)
-
Remove the air filter lower section upward - arrow -.
-
Disconnect electrical connector - 1 - on Engine Coolant Level (ECL) Warning Switch (F66) at bottom of coolant expansion tank.
-
Remove bolts - 2 - and - 3 - and lay aside coolant reservoir with connected coolant hoses - 4 - and - 5 -.
-
Remove bolts - 1 - and - 2 -.
-
Disconnect electrical connectors to ignition coils and press wiring harness to side.
-
Remove all ignition coils using Ignition Coil Puller (T40039).
