S6 Quattro Sedan V10-5.2L (BXA) (2007)
Clockspring Assembly / Spiral Cable: Service and Repair
Airbag Spiral Spring/Return Spring With Slip Ring F138
Airbag Spiral Spring/Return Spring With Slip Ring F138, Removing And Installing
Special tools, testers and auxiliary items required
-
Special Screwdriver T8 T40056 A
Removing
NOTE: Airbag Spiral Spring/Return Spring With Slip Ring F138 must be installed and removed in center position (wheels straight).
CAUTION: Observe safety precautions for work on airbags.
-
Switch on ignition.
NOTE: Contrary to description "Disconnecting and Connecting Battery", battery must be disconnected when removing airbag with ignition
switched on.
-
Remove luggage compartment floor trim.
-
Disconnect battery ground strap - arrow -.
-
Remove driver-side airbag unit.
-
Remove steering wheel.
-
On vehicles with electrically adjustable steering columns, remove lower driver-side instrument panel cover.