S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Secure Seat Occupied Recognition Pressure Sensor (G452) - 4 - on bracket - 9 -.
-
Secure Seat Occupied Recognition Control Module (J706) with bolts - 2 - (Qty. 2) to 2.5 Nm.
-
Connect connector - 6 -.
-
Upholster the seat pan, thereby all upholstery clips must be attached and be installed at the original position:
‹› Standard seat: Standard seat => [ Seat Pan Cover and Upholstery, Standard Seat ] See: Body and Frame/Seats/Service and Repair/Overhaul/Seat
Upholstery, Covers/Front Seat Pan Covers and Upholstery, Sports seat => [ Seat Pan Cover and Upholstery, Sport Seat ] See: Body and
Frame/Seats/Service and Repair/Overhaul/Seat Upholstery, Covers/Front Seat Pan Covers and Upholstery.
‹› Electric seat: Standard seat => [ Seat Pan Cover and Upholstery, Standard Seat ] See: Body and Frame/Seats/Service and Repair/Overhaul/Seat
Upholstery, Covers/Front Seat Covers and Upholstery, Power Memory Seats, Sports seat => [ Seat Pan Cover and Upholstery, Sport Seat ] See:
Body and Frame/Seats/Service and Repair/Overhaul/Seat Upholstery, Covers/Front Seat Covers and Upholstery, Power Memory Seats.
Further installation is performed in the reverse order of removal.
-
After installing passenger seat, select "Airbag" function in "Guided Fault Finding".
When installing a new service kit and after every repair on the front passenger seat:
‹› Seat Occupied Recognition Control Module (J706), basic setting
2
Bolts
‹› 2.5 Nm
3
Connector on Seat Occupied Recognition Control Module (J706)
‹› Must not be separated under any circumstances.
4
Seat Occupied Recognition Pressure Sensor (G452)
5
Pressure hose
CAUTION!
The pressure hose - 5 - and the Seat Occupied Recognition Mat must not be kinked under any circumstances during repairs.
-
Secure pressure hose at guide clip - 8 - at specified marking.
6
Connector between service kit and seat wiring harness
7
Connector on Seat Occupied Recognition Pressure Sensor (G452)
‹› Must not be separated under any circumstances.
8
Guide clip
9
Retaining bracket