S6 Quattro Sedan V10-5.2L (BXA) (2007)
Seat Belt: Testing and Inspection
Inspection Points
Inspection Points
CAUTION!
After every accident the seat belt system must be inspected systematically! If damage is determined when inspecting the check points,
customer must be informed regarding necessity of changing belts.
‹› Check belt webbing => [ Belt Webbing, Checking ] See: Belt Webbing, Checking
‹› Check retractor (locking function)=> [ Retractor, Checking Locking Function ] See: Retractor, Checking Locking Function
‹› Visual inspection of belt buckle=> [ Belt Latch, Visual Inspection ] See: Belt Latch, Visual Inspection
‹› Belt buckle function test=> [ Belt Latch, Checking Function ] See: Belt Latch, Checking Function
‹› Check belt guide rings and locking tongue=> [ Belt Guide Rings and Locking Tongue, Checking ] See: Belt Guide Rings and Locking Tongue,
Checking
‹› Check securing components and anchorage points=> [ Securing Components and Anchorage Points, Checking ] See: Securing Components and
Anchorage Points, Checking
‹› If customer refuses to have a damaged seat belt replaced, appropriate note should be made in service book.