S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Disengage spring component - arrow A -.
To do this, carefully push spring component retainer tab toward vehicle interior.
-
Push belt guide - 1 - down to stop.
-
Disengage locking hooks - arrow B -from keyhole-shaped opening.
-
Remove belt guide - 1 -.
-
Installing
Note left and right part marking when assembling.
-
L = Left part
-
R = Right part
-
Engage locking tabs - arrow B - in keyhole-shaped opening.
-
Push belt guide - 1 - up to stop.
Spring component - arrow A - must brace in body structure support opening - 2 -. This holds belt guide - 1 - in top position.
-
Install screws - 3 - and tighten to specified torque.
-
Ensure belt webbing clearance - 4 -.
Further installation takes in reverse order of removal.
2
-
Body structure support
3
-
Screws (2x) 5 Nm
4
-
Belt webbing