S6 Quattro Sedan V10-5.2L (BXA) (2007)
7
Connector on Seat Occupied Recognition Pressure Sensor (G452)
‹› Must not be separated under any circumstances.
8
Guide clip
9
Retaining bracket
Service kit, removing
-
Fold the cushion - 5 - upward.
‹› The cushion is included as part of the service kit.
‹› Clip - 4 - must not be separated.
‹› The hard foam insert in the crease is not included in the service kit.
-
Remove clips - 2 - and - 3 - (Qty. 2).
-
Carefully pull seat occupied recognition mat - 1 - with upholstery - 5 - upward while guiding Seat Occupied Recognition Pressure Sensor (G452)
and Seat Occupied Recognition Control Module (J706) through seat pan without disconnecting connectors.
-
Remove the complete service kit.
CAUTION!
The pressure hose and the Seat Occupied Recognition Mat - 1 - must not be kinked under any circumstances during repairs.
Service kit, installing