S6 Quattro Sedan V10-5.2L (BXA) (2007)
Power Door Lock Switch: Service and Repair
Drivers Interior Locking Switch E150 / Front Passengers Interior Locking Switch E198 (Central
Locking Switch), Removing and Ins
Drivers Interior Locking Switch E150 / Front Passengers Interior Locking Switch E198 (Central Locking Switch), Removing And Installing
Removing
CAUTION:
-
Switch off all electrical components.
-
Switch ignition off and remove ignition key.
-
Remove relevant front door trim
-
Disconnect electrical harness connector - 1 -.
-
Release retaining clips - arrows - and press interior locking switch from door trim toward toward vehicle interior.
Installing
Installation is performed in reverse order of removal, noting the following:
-
Press interior locking switch into switch mount until retaining springs engage.
-
Install front door trim.