S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Carefully release fasteners - arrows - and pull Airbag Spiral Spring/Return Spring With Slip Ring - 1 - off steering column switch module.
‹› Shown in illustration with steering column switch module (SCSM) removed.
Installing
‹› Tightening Specifications. Refer to=> [ Steering Column Switch Module Assembly Overview ] See: Relays and Modules/Relays and Modules -
Steering and Suspension/Relays and Modules - Steering/Steering Column Control Module/Service and Repair/Steering Column Switch Module
Assembly Overview and => [ Tightening specification, steering column trim ] See: Relays and Modules/Relays and Modules - Steering and
Suspension/Relays and Modules - Steering/Steering Column Control Module/Service and Repair/Steering Column Switch Module Assembly
Overview.
Install in reverse order of removal, observing the following:
-
Make sure all fasteners and electrical connectors are properly engaged.
-
Insert top trim piece for steering column switch into catches of bottom trim piece, press together and bolt.
-
Install lower instrument panel cover on driver's side.
-
Install steering wheel.
-
Install airbag unit. Refer to Removal and Installation.