S6 Quattro Sedan V10-5.2L (BXA) (2007)
1
Engine Coolant Temperature (ECT) Sensor (G62)
2
Knock Sensor (KS) 4 (G199)
3
Knock Sensor (KS) 3 (G198)
4
Fuel Pressure Sensor (G247)
5
Knock Sensor (KS) 1 (G61)
6
Knock Sensor (KS) 2 (G66)
7
Camshaft Adjustment Valve 1 (N205)
8
Low Fuel Pressure Sensor (G410)
-
Remove intake manifold. Refer to => [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake
Manifold.
‹› Seal intake channels in cylinder heads with a clean cloth.
-
Remove each knock sensor.
Installing
-
Attach respective removed knock sensor in its installation location.
‹› Tightening Specifications Ignition. Refer to => [ Ignition Assembly Overview ] See: Powertrain Management/Ignition System/Service and Repair
‹› Tightening specifications affects function of Knock Sensor (KS).
-
Install intake manifold. Refer to => [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake
Manifold.