S6 Quattro Sedan V10-5.2L (BXA) (2007)
Rain Sensor: Service and Repair
Rain Sensor, Removing and Installing
Rain Sensor, Removing And Installing
Removing Rain Sensor
NOTE: When removing rain sensor, a foil is detached from the sensor. This must be replaced before reinstalling.
-
Rearview mirror removed
-
Remove clamps - 3 - from mirror base retaining plate - 1 -.
-
Disconnect electrical connector to rain sensor.
-
Remove rain sensor from mirror base.
-
A sensor foil remains adhered to the windshield.
-
If the same windshield is reinstalled, remove this completely from the windshield.
-
Clean the surface with cleaning solution D 009 401 04.
NOTE: Part numbers are for reference only. Always check with your Parts Department for the latest part number information
Installing Rain Sensor
NOTE: If the same rain sensor is reinstalled, proceed as described.
-
Remove the rest of the sensor foil from the rain sensor, if necessary.
-
Carefully peel sensor foil - 2 - from rain sensor - 1 -.
-
Clean the surface with cleaning solution D 009 401 04.
NOTE: Part numbers are for reference only. Always check with your Parts Department for the latest part number information
CAUTION: Sensor surface must be completely free of foil remnants.