S6 Quattro Sedan V10-5.2L (BXA) (2007)
Power Distribution Module: Service and Repair
Vehicle Electrical System Control Module 2
Vehicle Electrical System Control Module 2
Component location: Beneath central tube for instrument panel at bulkhead.
Removing
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions" Vehicle diagnosis, testing and information system VAS 5051.
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Switch off ignition and remove ignition key.
-
Remove glove compartment.
-
Press clip - 2 - aside - arrow - and pull Vehicle Electrical System Control Module 2 (J520) out of retaining frame.
-
Disconnect electrical connector - 1 -.
Installing
Install in reverse order of removal, observing the following:
-
Install glove compartment.