S6 Quattro Sedan V10-5.2L (BXA) (2007)
All vehicles
-
Remove lower nuts - 3 - from the steering gear heat shield - 2 -(above the left catalytic converter).
-
Lower vehicle.
-
Remove engine cover.
-
Remove coolant reservoir - arrows - and move it to the side. Do not open the cooling system.
-
Remove bolt - 4 - and upper nut - 3 - from the steering gear heat shield - 2 - inside the engine compartment.
-
Push heat shield - 2 - to the side over the transmission.
-
Remove locking bolt - arrow - on the steering gear.