S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-4644004.png)
-
To remove locking bolt, insert the tool - arrow - from the top between the engine and the plenum chamber.
-
Center steering gear. Refer to => [ Centering Steering ] See: Service and Repair/Procedures.
-
Clamp off suction and return line using Hose Clamps Up to 25 mm dia. (3094).
-
Remove expanding rivet - 1 - and nut - 2 - and remove the left and right trim - arrow - in the wheel housing.
