S6 Quattro Sedan V10-5.2L (BXA) (2007)
Continuation for all vehicles
-
Move steering gear to the left and remove it.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
-
Install steering gear from the left (a second technician is needed) until the connector can be connected.
Steering gear with separate connector
-
Connect the connector - 1 - and secure it to the steering gear using a cable tie - 2 -, as illustrated.
If the steering gear was replaced, then the wiring harness connector must be adapted to the steering gear.
Steering gear with integrated connector
-
Connect the connector - arrow -.