S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Mark rim offset - arrow - on bearing - 1 -.
Use e.g. a waterproof felt marker for marking.
-
Arrange special tools as shown in illustration.
-
Press bearing - 1 - out of control arm - 2 -.
Pressing in bearing
-
Transfer marking of rim offset from old onto new bearing.
-
Coat bearing thinly with assembly paste G 052 109 A2.
-
Insert bearing - 1 - into control arm - 2 -.
-
Arrange special tools as shown in the illustration.
Note:
^
When pressing in, make sure that bearing is not canted.
-
Press bearing - 1 - into control arm - 2 -.
-
When pressing in, note marking to rim offset arrow -.