S6 Quattro Sedan V10-5.2L (BXA) (2007)
Radius Arm: Service and Repair
Guide Link Bearing
Guide Link Bearing
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 402)
‹› Punch (VW 407)
‹› Press tool (3345)
‹› Assembly tool (3347/1)
‹› Hold the guide link firmly in position while pressing bearing out and in.
Bearing, Removing
-
Remove guide control arm. Refer to => [ Guide Link ] See: Guide Link.
-
Mark installation depth - arrow - on the bearing - 1 -.
Use a waterproof felt-tip pen for marking.
-
Install special tools as shown in the illustration.
-
Press bearing - 1 - out of track control arm - 2 -.
Bearing Race, Installing
-
Transfer the installation depth marking from the old bearing to the new one - arrow -.