S6 Quattro Sedan V10-5.2L (BXA) (2007)
Level Control Solenoid Valve: Service and Repair
Level Control System Solenoid N111, Removing and Installing
Level Control System Solenoid N111, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G. 1783
^
Insertion tool 10 mm V.A.G. 1783/1
Removing
Note:
^
Level Control System Solenoid N111 is installed on air supply unit under right front wheel housing liner.
-
Position vehicle on lifting platform.
-
Remove noise insulation.
-
Slowly loosen air line - 1 - of air supply unit and let air pressure dissipate. Once air pressure has dissipated, remove air lines.
Note:
^
For the sake of illustration, air supply unit is depicted as removed.