Audi Workshop Service and Repair Manuals

-

Remove threaded connections - 2 - and pull the wheel housing liner to the side.

-

Remove hex bolts - 1 -.

-

Remove shock absorber.

Installing

Installation is in reverse order of removal. Observe the following when doing so:

Tightening specifications. Refer to => [ Wheel Bearing Housing, Wheel Bearing Unit, Shock Absorber Coil Spring

Assembly Overview ] See: Rear Knuckle/Service and Repair/Removal and Replacement/Rear Suspension/Wheel Bearing Housing, Wheel Bearing Unit,
Shock Absorber Coil Spring Assembly Overview