S6 Quattro Sedan V10-5.2L (BXA) (2007)
Fluid Filter - A/T: Removal and Replacement
Oil filter, removing and installing 09E, 6 Speed AWD A/T
Note:
^
Rules of cleanliness for working on automatic transmissions.
^
General repair notes.
Removing
-
Remove oil pan.
-
Carefully remove ATF filter - A - from transmission.
Installing
Note:
^
The oil filter seal - A - normally remains in the transmission.
^
If the oil filter is replaced, the seal must first be removed.
^
If the used oil filter is re-installed, this seal can be re-used.
Note this when replacing with a new ATF filter:
Note:
^
The ATF filter only requires replacement when it is damaged.
^
With high mileage, replacement of the oil filter is recommended when the oil pan is removed.
-
Carefully remove seal for ATF filter - A - from transmission, e.g. using a screwdriver.
Note:
^
Do not damage sealing surface.
^
The illustration shows seal with mechatronics unit removed.
^
The new ATF filter is supplied with the seal in place.