S6 Quattro Sedan V10-5.2L (BXA) (2007)
Install in reverse order of removal, note this:
Note:
^
Replace gaskets.
^
Drain plug with sealing ring must be replaced.
^
With high mileage, replacement of the oil filter is recommended when the oil pan is removed.
Note:
^
The ATF filter only requires replacement when it is damaged.
-
Clean all 6 magnets in depressions in oil pan. Ensure that the magnets are in full contact with the oil pan.
-
Thoroughly clean sealing surface, removing residual gasket material completely.
-
Insert new seal between transmission and oil pan.
-
Tighten oil pan bolts diagonally in several stages.
-
Top off ATF.
-
Install exhaust system and adjust free of tension.