S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Carefully press selector lever cable ball socket - 1 - in this position onto selector shaft lever.
Note:
^
Take care not to bend selector shaft lever when pressing it on; support it if necessary, as otherwise selector mechanism can no longer be adjusted
properly.
Note:
^
Note marking applied with felt-tip pen indicating installation position of selector lever cable.
^
Do not bend or kink the selector lever cable.
-
Attach bracket - 2 - according to marking on transmission.
-
Install selector lever cable heat shield with bolts - arrows -.
-
Secure sound insulation to shift mechanism with four new lock washers - 1 -.
-
Install transmission mount and tunnel cross member.