S6 Quattro Sedan V10-5.2L (BXA) (2007)
/Page-3329005.png)
-
Pull joint out horizontally with impact tool.
Leave the joint in the assembly/removal tool (T40018).
-
Mark installation position of the parts - 1 - and - 2 - with lines.
If they are not marked and are not re-installed in their previously installed positions, noises may occur later during driving operation.
A water-proof felt pen is well-suited for marking.
1
Driveshaft
2
Triple roller star
-
Remove grease with lint-free cloth.
-
Remove the circlip using pliers - 1 - (commercially available).
