S6 Quattro Sedan V10-5.2L (BXA) (2007)
-
Remove bolts - 1 through 5 - and remove rear transmission mount.
Note:
^
The tunnel cross member remains in the vehicle.
-
Remove bolts - arrows - and remove transmission support.
Note:
^
The cover has no oil drain plug, so the gear oil can only be drained by removing cover.
-
Place old oil collecting and extracting device V.A.G. 1782 beneath transmission.
CAUTION!
The self-locking center differential can fall out the transmission when its cover is removed.
-
Loosen bolts - arrows - on self-locking center differential cover in a diagonal sequence and remove them.
-
Allow escaping axle oil to drain into Used Oil Collection and Extraction Device V.A.G. 1782.
-
Slowly and carefully pull cover off transmission along with self-locking center differential.
Installing