S6 Quattro Sedan V10-5.2L (BXA) (2007)
Shift Interlock Solenoid: Service and Repair
Shift lock solenoid N110, removing and installing 09E, 6 Speed AWD A/T
Removing
-
Place selector lever in position "P"
-
Remove front center console - 1 - .
-
Disconnect electrical harness connector on Shift Lock Solenoid N110.
-
Press retaining hooks - A - into shift mechanism - arrow - and hold it down.
Note:
^
If retaining hook - A - is broken off, selector mechanism function unit must be replaced.
-
Tip Shift Lock Solenoid N110 down and out indirection of -arrow - so that ball head - 1 - disengages from operating lever on shift mechanism.
-
Remove Shift Lock Solenoid N110.
Installing
Install in reverse order of removal, note this:
-
Rotate ball head - 1 - to correct installation position.
-
Guide Shift Lock Solenoid N110 diagonally from above into shift mechanism.
-
Tip Shift Lock Solenoid N110 down in opposite direction of - arrow -.