S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
High Pressure Sensor / Switch: Service and Repair
Function
Switches A/C clutch OFF if system pressure is too high.
-
Switch identification: red housing with bonded wire connections.
-
Switch located on left side of condenser.
-
Switch opens (compressor OFF): 28.2-31.0 bar (409-450 psi).
-
Switch closes (compressor ON): 10.3-17.2 bar (149-250 psi).
Removing And Installing
-
Remove electrical connector and unscrew high pressure switch -F118-. Refrigerant system remains closed (Schrader valve under switch).
-
Install new O-ring -A- (7.6 mm x 1.8 mm), lubricate with refrigerant (PAG) oil and ensure proper seating in groove.
-
Torque switch to 5 Nm (44 in lb).