S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
-
Repair open circuit and/or short circuit in the wires between sensor harness connector and the ECM harness connector terminals 47, 48 and 19,
if necessary.
If OK:
-
Check sensor pin on ring gear.
-
Remove bracket with CKP sensor and Engine Speed (RPM) sensor.
-
Rotate engine until reference pin appears in starter opening.
-
Inspect pin for looseness, damage or bent condition; replace if necessary.
If OK:
-
Replace ECM.