S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
Control Arm: Service and Repair
Fig. 60 Exploded View Of Control Arm.
1. Raise and support vehicle, then remove wheels.
2. Remove fasteners securing guide for wheel speed sensor wiring, then the guide.
3. Disconnect spring from brake pressure regulator, then loosen trapezoidal arm mounting bolts from wheel bearing housing.
4. Loosen trapezoidal arm to pivot mount bolt, Fig.60, then the trapezoidal arm to crossmember mounting bolt.
5. Loosen trapezoidal arm to support mounting bolt, then remove support to body mounting bolts and support.
6. Remove trapezoidal arm to support mounting bolt, then the pivot mount to wheel bearing housing bolt.