S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
Seals and Gaskets: Service and Repair
Left Side Seal
COMPONENT NOTES AND INFORMATION
1
Right flanged shaft
2
Oil seal
-
For right flanged shaft
-
Replacing, refer to Right Side Seal.
3
Oil seal
-
For left flanged shaft
4
Left flanged shaft
5
Magnetic ring for speedometer Vehicle Speed Sensor (VSS)
-
Replacing, refer to Instrument Panel, Gauges and Warning Indicators.
6
Speedometer Vehicle Speed Sensor (VSS)
-
Replacing, refer to Instrument Panel, Gauges and Warning Indicators
PROCEDURE
NOTE:
^
Refer to General Repair Instructions.
^
Transmission installed
-
Remove three way catalytic converters.
-
Remove heat shield for drive axle.
-
Disconnect drive axle from flanged shaft.
-
Turn steering to full lock and tie up drive axle.
-
Bend up tabs of locking washer (arrows) for flanged nut with a screwdriver and remove.
-
Unscrew flanged nut for flanged shaft.
To loosen the flanged nut, screw two bolts into flanged shaft and counter-hold with assembly lever.
-
Remove flanged shaft.