S6 Wagon L5-2226cc 2.22L DOHC Turbo (AAN) (1995)
Power Window Switch: Service and Repair
Window Switch (Rear), Removing and Installing
Removing
NOTE: Wiring harness is soldered to window switch.
-
Remove armrest cover.
-
Unscrew and remove armrest.
-
Push inner door lock mechanism in direction of (arrow) and pull out of door trim panel.
-
Unhook cable.
-
Using small screwdriver, pry out switch at points shown (arrows).
-
Remove door trim.
-
Disconnect plug connector.
Installing
Install in reverse order of removal.