S8 Quattro Sedan V10-5.2L (BSM) (2009)
Rear Fender Liner: Service and Repair
Rear Wheelhousing Liner
Wheel Housing Liner
Rear Wheel Housing Liner
1 - Rear wheelhousing liner
‹› Rear wheel removed.
2 - Hex nut
‹› 1.5 Nm
3 - Sheet-metal screw
‹› 1.5 Nm
4 - Expanding clip
5 -
‹› Press in clamping pins only approx. 5mm and pull out expanding clip released by doing this.
‹› Before installing, slide back clamping pin.
‹› After installing, press in clamping pin flush.