Workshop Repair Manuals

Audi Workshop Manuals

[NEXT PAGE]

audi Workshop Repair Guides


S8 Quattro Sedan V10-5.2L (BSM) (2009)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Service and Repair

Page 1
background image

Alarm Module: Service and Repair

Access/Start Authorization Control Module

‹› Component location: On vehicle floor beneath driver's seat.

Removing

-

If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine. 

-

Remove driver's seat.

-

Switch off ignition and remove ignition key.

-

Remove lower A- and B-pillar trim.

-

Fold back floor carpet.

-

If installed, remove bolts - arrows - and set aside retaining bracket with wiring harness.

-

Remove nuts - 1 - and - 2 -.

-

Disconnect electrical connections - 3 - and -  4 - and remove Access/Start Control Module (J518).

Installing

Install in reverse order of removal, observing the following:

-

Install lower A- and B-pillar trim.

-

Install driver's seat.

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Service and Repair

[NEXT PAGE]