TT L4-1.8L Turbo (BEA) (2004)
3
-
Pop rivet
-
To remove, drill off rivet head and knock out shank
4
-
Cover trim
-
Unclip
5
-
Combi bolt
-
12 Nm
6
-
Striker plate
Adjusting:
-
Tighten combi bolt - 5 - finger-tight (striker plate should still be movable).
-
Carefully close tailgate until flush with rear side panels.
-
Carefully open the tailgate and tighten combi bolts to 12 Nm.
7
-
Rear lid hinge