TT L4-1.8L Turbo (BEA) (2004)
Glove Compartment Lock: Service and Repair
Glove Box Locking Mechanism, Removing and Installing
Glove Box Locking Mechanism, Removing And Installing
-
Remove screws - 1 - (6x), tightening torque 1 Nm.
-
Pull out cover - 2 - in direction of - arrow -.
-
Use screwdriver to pry out linkage - 1 - (2x) at guides - 2 -.
-
Pull linkages - 1 - (2x) inwards at - 3 -.
-
When installing, insert linkages - 1 - (2x) at gear wheel so that projection at - 3 - is approx. 5 mm.