TT L4-1.8L Turbo (BEA) (2004)
/Page-4522003.png)
CAUTION: Danger of breakage, retaining pins on inner side of faceplate are secured with super glue.
Fig. 2 Face plate retaining pins
-
When installing face plate - 1 -, retaining pins must also be secured using super glue.
-
Remove bolts from inner side of face plate - 1 -.
-
Remove bolts (arrows) from side and on front face.
-
Side bolts are located under seal - 2 -.
-
Remove cover - 1 - upward over rotating handle.
-
Remove bolts (arrow) (7x) from retaining strip - 1 - for mechanical connection to cowl panel.